Hi Richard,
Very nice first light shots. What is the field of view in arch min.?
Rashad
----Original Message Follows----
From: "Richard Crisp" <rdcrisp@earthlink.net>
Reply-To: The Astronomy Connection <sf-bay-tac@seds.org>
To: "The Astronomy Connection" <sf-bay-tac@seds.org>
Subject: [TAC] first light testing of 18" Cass
Date: Sat, 30 Oct 2004 23:42:45 -0700
After completing the initial assembly 10 days ago, last night I finally was
able to shoot some initial images with the new 18" Cassegrain that many of
you saw in my foyer at last Saturday night's party
I was expecting to have to solve problems and I wasn't disappointed in that
regard. The key one was coming up with a method of taking flats. Normally I
shoot my flats in the daytime and with an open frame such as I have with the
18" cass I expected that would cause me some problems.
One thing that has been identified as an issue is the fact that my baffling
permits "Flooding" of light past the secondary baffle to shine directly down
the primary baffle. That causes lots of problems including shooting flats.
That is sort of the next big task for the scope is to correct that. The
baffle maker is planning to make me an extension baffle for the secondary
mirror and that should cure the problem.
I also had some vignetting due to the way I assembled my beam splitter to
permit me to use an AO7 to guide this F=5760mm beast. once I shot the images
last night that was apparent and I believe I corrected the problem today,
but the clouds haven't permitted me to test it.
I also made a small baffle to insert into the primary baffle to cut off the
flooding rays and it looks like that will at least permit me to take
twilight flats, which I was able to do today. Unfortunately as I mentioned,
the clouds rolled in shortly after dark so I am unable to test the items I
corrected since the images were shot last night.
The first object was the Bubble Nebula, NGC7635. I shot this as a simple
RGB. With the 9 micron pixels of the FLI IMG6303E camera used at F=5760mm, I
decided to run them binned 2x2 giving me a 4 x speedup in exposure time yet
keeping a respectable 0.64 arc-sec/pixel image scale and 1.5Mega pixels of
18 x 18 micron equivalent size.
So this image has the resolution of an ST8E with pixels that are four times
the area.
The Bubble was shot as a series of 3 minute exposures, again binned 2x2.
That is like taking 12 minute exposures unbinned from a depth of exposure
perspective.
The second image was the Trapezium region of M42. This was a series of 15
second RGB exposures and a series of 30 second Halpha exposures. I blended
Red and Halpha to use for the Red channel and used the Halpha for the
Luminance channel
Because neither image was flat fielded, I have lots of ugly artifacts
including dust motes from the optics, some ugly weak columns and other such
blemishes that are usually corrected by flat fielding.
The things that I like are that the stars are basically round, and are
splitting nicely.
Hopefully now that things are more or less ready to test for a second night
I will get a chance on Sunday night.
http://www.narrowbandimaging.com/ccc18_first_light_page.htm
or for scope details;
http://www.narrowbandimaging.com/cc18_page.htm
Received on Sun Oct 31 10:25:21 2004